Professional Edmonton Burst Pipe Repair Services

If you can’t get a plumber in right away for one reason or another, there are a few things you can do to temporarily repair the pipe. However, this will only work for very small areas of damage. A pipe that has burst in multiple places needs immediate attention from a plumbing professional.

To quickly block a leak on a pipe in your home before the Mr. Rooter Plumbing team shows up, keep a couple of products on hand:

• Self-fusing silicone tape
• Epoxy putty

Keep in mind these fixes won’t last long and only work on low-pressure lines. You’ll still need to call a plumber to properly repair your lines.

There are multiple causes of a burst pipe in Edmonton, the most common of which is frozen pipes. Older pipes are more susceptible to bursting, as they can develop weak spots that fail when water pressure builds. Traditionally, these lines were made out of either galvanized steel or copper. Since around 1980, homes in Edmonton have primarily been built using PEX (a type of plastic) lines. PEX is much more resistant to temperature fluctuations and will not corrode.

Other possible causes of a burst pipe in Edmonton include:

• Tree root intrusion
• Natural aging
• Rust and corrosion
• Clogs
• Water pressure that is too high

To prevent avoiding Edmonton burst pipe repair service in the future, we’ll identify the cause and make recommendations for changes you can make.

A burst, leaky pipe and the thousands of dollars worth of repairs that can come with them may be covered by your insurance company—but don’t bet on it. It’s a good idea to pull up your insurance policy and take the time to read the fine print. If water damage caused by a burst pipe is covered, chances are it’s only covered under certain circumstances.

Pipes that burst due to an improperly insulated garage may not be covered, nor will any damage arise from a lack of maintenance. This is especially true if these lines are visible (underground pipes have a higher chance of being covered since they can’t be seen). The more ‘accidental’ and ‘sudden’ the burst pipe is, the more likely it is that your insurance policy will cover some of the damage.

Many homeowners can instantly tell when something is wrong with their plumbing system, but knowing the cause of their issues right off the bat is easier said than done. Oftentimes, we receive calls from customers who describe the symptoms of the issue they’re having. It’s our job to determine the cause.

Some signs that indicate you may be dealing with a burst pipe include:

• Inconsistent water pressure
• Discolored water with a strange smell
• Higher utility bills
• Evidence of water leaks, such as wet spots and dark stains on your ceiling and walls

If you notice any of the above issues, call us right away.

Taking preventative measures can significantly reduce your chances of needing a burst pipe repair service. As discussed above, the primary cause of burst pipes is freezing. When the liquid in your pipes freezes, the pressure inside the pipe increases significantly, causing it to burst. The key is therefore ensuring that your pipes stay warm. There are a few ways to do this:

• Get your water lines insulated
• Run space heaters in rooms without heating, such as garages
• Set your thermostat a couple of degrees higher
• Keep a trickle of water running through your faucet during cold weather

Another strategy for avoiding burst pipe repairs is to invest in our preventative maintenance services. If you live in a home built before the 1980s, keeping an eye on your plumbing infrastructure through video camera inspections is a good idea, as this will allow us to catch problems before they end up costing you an arm and a leg.

The length of your burst pipe repair service appointment will vary depending on the location of the burst pipe, as well as the extent of the issue. We understand that having your water turned off can be a huge inconvenience, so we’ll do our best to get the repair done as quickly as possible.

To find out exactly how long we expect your service to take, contact us by phone to explain your project specifications.

A pipe can definitely still burst if your water is shut off. Standing liquid is much more likely to freeze than flowing liquid, which is why it’s important to empty out your lines as best as you can. Additionally, a water shutoff valve only prevents water from entering your home. The liquid in your main supply line located underneath your property may still freeze.

In our opinion, any water damage is too much. However, if you’re asking in terms of repair costs, we’d say that any water damage that causes structural damage is especially of concern. When water infiltrates the wooden structure of your home, such as your wall and floor joists, these components can develop wood rot. Once wood rot begins, they’ll need to be replaced. This will involve ripping out your walls, ceilings, or floors. Reinstalling these will cost a pretty penny.

The moment you notice wetness where it shouldn’t be, mop it up, crank up the heat and run some fans. This will increase your chances of drying out the area before wood rot sets in. Of course, don’t forget to investigate the underlying source of that moisture, so that you can stop it from coming back.

If you think you may need burst pipe repairs in Edmonton, don’t delay in getting in touch. By contacting our team at Mr. Rooter Plumbing of Edmonton sooner rather than later, you can reduce your chances of incurring significant damage-related costs.

To book your appointment, give our customer service team a call today. For non-urgent requests and queries, you can also fill out our online job estimate request form and one of our representatives will get in touch as soon as they can.